Double saw blade cold cutting milling saw for 426 steel pipe and tube max
Cutting method
There are 2 milling saw blades to cut along the outer contour of the pipe.
The CNC milling fixed-length flying saw machine is composed of two parts: mechanical structure and automatic control system. The user sets the cutting length, pipe parameters and other information on the operating table, and the CNC milling fixed-length flying saw machine automatically completes the full cycle process of quick start, synchronous tracking, clamping cutting and quick return.
Advantages of profile milling saw
Save saw blades and reduce costs: The saw blades on both sides extend the pipe wall into the cut to realize the imitating pipe wall cutting that simulates the pipe trajectory. Thus, the size of the saw blades used is greatly reduced, and the price of two small-size saw blades is lower than that of large saw blades with conventional cutting methods.
Carbide tipped saw blade, increase strength: It can cut welded pipes with internal ribs and high-strength materials. It has a wider application range and greatly improves the life of the saw blade. The cutting life is more than twice that of ordinary saw blades.
Online cut-to-length, stable quality and high efficiency: According to the cutting pipe type, pipe diameter, wall thickness, production line speed requirements and other working conditions, the cutting solution can be tailored for users through the servo system. Thereby improving equipment efficiency and stability, saving material and time costs.
| Milling saw |
| Cutting material | Q195 Q235 SPCC |
| Cutting range | Round tube Max 219mm | Thickness:2.0-10mm |
| Square tube Max150x150mm |
| Rectangular tube |
| Production speed range | 36-40m/min(when CTL 6 meters, OD140mm,thickness 3.0mm) |
| Cut to length | Min 1500mm |
| Length tolerance | +-1.5mm, the speed fluctuation of the production line is required to not exceed 2% |
| Burr height after cutting | Max 0.25mm |
| Voltage | AC 380V,3PH,50HZ |
| Mechanical part |
| Milling saw length | 8600*1800*1800mm(The final drawings shall prevail.) |
| Motor | Drive motor: 22KW | Servo Motor |
| Turntable motor: 3.14KW |
| Turntable motor: 3.14KW |
| Feed motor:1.9KW |
| Feed motor:1.9KW |
| Saw blade motor: 15KW |
| Saw blade motor: 15KW |
| Lifting motor:3.3KW |
| Linear guide rail | Taiwan HIWIN 65 |
| Clamping device | Hydraulic type |
| The specifications and models of the clamp block are provided | the inlet end is tapered to prevent the steel pipe from being scratched |
| Oil supply system | Automatic fueling device |
| Saw blade | TCT |
| Spindle gearbox | Taiwan Liming |
| Gear rack | Taiwan KH |
| Cable protection | Domestic drag chain |
| Trolley protection | with trolley safety buffers at the front and rear of the sawing machine |
|
|
Double saw blade cold cutting milling saw for 426 steel pipe and tube max Images
|
